Tronix-Pak Enclosure Model
|
TRONIX-PAK™ is a small power system designed for low power applications such as remote instrumentation, telemetry, or communications. The Tronix-Pak is available in both solar power and backup (AC line power) packages, in a NEMA 3R/4X enclosure.
A standard solar Tronix-Pak accommodates a single 110Ah or (2)-36Ah batteries, with extra room on the back plane for electronics or a radio. Power ranges from 20W to 160W; 12VDC or 24VDC.
A DC-UPS Tronix-Pak system has backup capacity ranging from hours to weeks. Power options range from 30W to 200W; 12VDC to 24VDC.
An extended electronics compartment is available, as well as 1 or 2 battery shelves. Double wide Tronix-Pak enclosures are available for dual power supplies or a DC-UPS and a 24-VAC inverter.
The Tronix-Pak can also be used as a single compartment NEMA 4X enclosure with the batteries in a separate UNI-BOX™. Because the two enclosures are the same width, a simple mounting frame makes for a neat installation.
To download information about Tronix-Pak enclosure configurations, click here.
Solar Features
- Solar module with aluminum mounting bracket and 12’ cable
- Deep cycle gel cell battery
- Welded aluminum NEMA 3R/4X construction
- Heat reflective white powder coat finish
- Stainless steel hardware
- Integral mounting brackets
- 3/8” brass ground stud
- DIN rail mounted fuses and terminal strip
- RF Lightning Arrestor
- Cable glands, connectors installed
- Code compliant when installed with rigid conduit or armored cable
DC-UPS Features
- Universal Input 85–265 VAC
- Power factor corrected; temperature compensated battery charging
- Low voltage disconnect
- LED status indicators
- Loss-of-power alarm contacts
- Low noise, filtered output
- Glitch-less switchover
- Input and Output magnetic circuit breakers
- Optional surge arrestor
- Reverse polarity protection